Color Change Corporation
Material Safety Data Sheet #2000
Effective Date: January 1, 2001
______________________________________________________________________________
Color Change Corporation urges each customer or recipient of this MSDS to study it carefully to become aware of and understand the hazards associated with the product. The reader should consider consulting reference works or individuals who are experts in ventilation, toxicology, and fire prevention, as necessary or appropriate to use and understand the data contained in this MSDS.
To promote safe handling, each customer or recipient should: (1) notify its employees, agents, contractors and others whom it knows or believes will use this material or the information in this MSDS and any other information regarding hazards or safety; employees, customers, and other users of the product of this information.
Color Change Corporation
1545 Burgundy Parkway
Streamwood, IL 60107-1811
Tel: (630) 289-0900
Fax: (630) 289-0909
Emergency Response: (800) 424-9300
______________________________________________________________________________
I. Material Identification
Product Name/Numbers: Thermochromic Powder, LD-P
Chemical Name: Microencapsulated Leuco Dye
Chemical Family:
Formula:
Molecular Weight:
Synonyms:
CAS # and Name:
Manufacturers: Color Change Corporation
_____________________________________________________________________
Precautionary Labeling
National Paint and Coatings Association Hazardous Material Identification System
_____________________________________________________________________
II. Physical Data
Boiling Point: N/A
Melting Point: starts 150°C
Specific Gravity (H20 = 1): N/A
Freezing Point: N/A
Vapor Pressure at 20°C: UNK
Evaporation Rate: N/A
Solubility in Water by wt: immiscible
Appearance: colored powder
Odor: no characteristic odor
Physical State: powder
Percent Volatiles (by volume): N/M *
* Tested according to EPA test method 24. The specific VOC number for each product covered by this MSDS may be obtained by contacting Color Change Corporation.
______________________________________________________________________________
III. Ingredients
% Material CAS# Exposure Limit
Trade Secret
No hazardous ingredients as defined by OSHA 29 CFR 1910.1200.
______________________________________________________________________________
IV. Fire and Explosion Hazard Data
Flash Point (test method(s)): Non-combustable
Flammable Limits in Air (% by volume): LOWER: N/A
UPPER: N/A
Special Fire Fighting Procedures: Use self-contained breathing apparatus and protective clothing.
Extinguishing Media: Use water spray, foam, carbon dioxide, dry chemical media.
Unusual Fire and Explosion Hazards: None
______________________________________________________________________________
V. Health Hazard Data
Exposure Limit(s) None established by ACGIH or OSHA.
Effects of Single Overexposure:
Swallowing: May cause abdominal discomfort, nausea, vomiting, and diarrhea.
Skin Absorption: May cause irritation, defatting or dermatitis.
Inhalation: Not a problem at room temperature, but fumes formed at elevated temperatures may be irritating to eyes, skin and respiratory tract.
Skin Contact Brief contact is not normally irritating. Prolonged or repeated contact may cause discomfort and local redness.
Eye Contact: Causes severe irritation, experienced as discomfort or pain, excess blinking and tear production, marked excess redness and swelling of the conjunctiva, and chemical burns of the cornea. Iritis may occur.
Medical Conditions Aggravated by Overexposure:
A knowledge of the available toxicology information and of the physical and chemical properties of the material suggests that overexposure is unlikely to aggravate existing medical conditions.
Significant Laboratory Data with Possible Relevance to Human Health Hazard Evaluation:
This product is not considered a carcinogen by NTP/IARC.
Other Effects of Overexposure:
None currently known.
Emergency and First Aid Procedures:
Swallowing: If victim is conscious, give liquids and induce vomiting. Never give liquids to an unconscious person. Get medical attention.
Skin: Remove contaminated clothing. Remove excess with absorbent material. Wash skin with soap and water. Obtain medical attention if irritation persists. Wash clothing before reuse.
Inhalation: If any symptoms develop, remove to fresh air. If necessary, give artificial respiration. Get medical attention.
Eyes: Immediately flush eyes with water and continue washing for at least 15 minutes. Obtain medical attention without delay, preferably from an ophthalmologist.
______________________________________________________________________________
VI. Reactivity Data
Stability: Material is stable
Conditions to Avoid: Prolonged excessive heat may cause product decomposition.
Incompatibility (materials to avoid): Strong oxidizing agents
Hazardous Combustion or Decomposition Products: Burning can produce the following combustion products: N/M
Hazardous Polymerization: Cannot occur
______________________________________________________________________________
VII. Spill, Leak and Disposal Procedures
Steps to be taken if material is released or spilled:
Wear eye and skin protection. Floor may be slippery; use care to avoid falling. Contain spills immediately with inert materials (e.g. sand, earth). Avoid discharge to natural waters. Transfer liquids and solid diking material to suitable containers for recovery or disposal. Use absorbent to clean remainder.
Waste Disposal Method: Small amounts can be hardened with absorbent material and disposed of as a solid. Dispose of all materials in accordance with the applicable local, state, and federal regulations.
_____________________________________________________________________________
VIII. Special Protection Information
Respiratory Protection (specify type): Wear a MSHA/NIOSH approved (or equivalent) half-mask air purifying respirator.
Ventilation: Local exhaust as needed by operators near processing equipment.
Protective Gloves: Impervious (Neoprene)
Eye Protection: Monogoggles recommended
Other Protective Equipment: Eye Bath, Safety Shower, Chemical Apron
______________________________________________________________________________
IX. Special Precautions
Precautions to be taken in handling and Storage:
Do not store near heat or flame, material can gel with long exposure to elevated temperatures (above 90' F).
DANGER!
· Causes eye burns.
· Harmful if swallowed.
· Causes skin irritation.
· Do not get in eyes.
· Do not swallow.
· Avoid contact with skin and clothing.
· Keep container closed.
· Use with adequate ventilation.
· Wash thoroughly after handling.
NOT INTENDED FOR DRUG USE
FOR INDUSTRY USE ONLY
______________________________________________________________________________
NOTE---
All recommendations and statements made, if any, are based on Color Change Corporation's research and experience. However, since Color Change Corporation has no control over the conditions of use or storage of the product sold, Color Change Corporation cannot guarantee the results obtained through the use of its products. All products are sold and samples given without any representation or warranty, expressed or implied, of fitness for any particular purpose or otherwise, and upon condition that the buyer shall determine the suitability of the product for its own purposes. This applies also where protective rights of third parties are involved. It does not release the user from the obligation to test the suitability of the product for the intended use and application. Color Change Corporation makes no warranty as to the absolute correctness or sufficiency of any of the foregoing or that additional or other measures may not be required under particular conditions.